Introduction:
Made of polypropylene (PP) plastic in a spherical shape, two hemispheres are combined to form a spherical shape. Each hemisphere has 8-12 semi fan-shaped blades according to design requirements, and the fan-shaped blades of the two hemispheres are staggered from each other. The characteristic of this filler is its large specific surface area and high porosity. However, due to the large number of leaves, there is a shielding effect between them, which is not conducive to liquid distribution and wetting; Most liquids accumulate in hollow spherical columns, hindering the flow of gas, resulting in greater resistance. This type of filler is commonly used in waste gas treatment and water treatment engineering.
Performance:
High gas velocity, multiple blades, and low resistance; Large specific surface area, which can fully solve gas-liquid exchange; It has the advantages of low resistance and high operational flexibility.
Structure:
A spherical shape is formed by combining two hemispheres, with 8-12 semi fan-shaped blades on each hemisphere. The fan-shaped blades of the two hemispheres are staggered from each other, and there is a fixing ring in the middle of the multi sided hollow ball along the entire circumference, with evenly distributed blades on top. The upper and lower lobes are staggered and arranged radially along the central axis.
Characteristics:
1. High gas velocity, multiple blades, and low resistance; 2. Large specific surface area, which can fully solve gas-liquid exchange;
3. Multi sided hollow balls have the characteristics of high production capacity, low resistance, and high operational flexibility.
4. A treatment device with light weight, high strength, large free space, high temperature resistance, corrosion resistance, good surface hydrophilicity, low wind resistance, low power consumption, large specific surface area, and adaptability to various solvents.
Main applications:
Widely used in environmental protection equipment such as chlorine removal, oxygen removal, carbon dioxide removal absorption towers, waste gas purification towers, acid mist purification towers, etc.